Search 41 results for "surge protection device"
Mersen’s Surge-Trap® STXH surge protective device adds a critical layer of surge protection for your entire home. From your family room to your office, and your kitchen, your entire electrical system is protected. This simple whole house solution is installed at your load center – out of sight, out of mind.
Featuring Mersen’s industry leading TPMOV® Technology inside, Mersen’s Surge-Trap® SPDs meet the rigorous safety requirements of the UL 1449 4th edition safety standard and need no additional overcurrent protection.
Mersen's patented TPMOV® (Thermally Protected Metal Oxide Varistor) eliminates common destructive failure modes associated with standard MOVs. Comprised of a voltage clamping device and a disconnecting apparatus that monitors the status of the metal oxide disk inside the TPMOV, the device is securely disconnected in the event of an overvoltage by an arc shield.
POP CT is the series of combined power frequency overvoltage protection (POP) and surge protection device for discharging surge current in the first step of protection according to EN/IEC 61643-11.
Intended for actuation on the contactor of an installation (not included). Suitable for the first stage of protection in commercial or other applications not exposed to direct strikes and with no external lightning protection system. These devices are suitable for installation in lighting panels.
Combined Type 2+3/Class II+III syreg protective devices for discharging voltage surges while providing a very fine voltage protection level, in accordance with EN/IEC 61643. Solutions suitable for protection of LED outdoor luminaires (street-light and for protection in the fusebox (mast) of LED outdoor luminaires. Due to the exposure of the extremely sensitive LED electronics to lightning–induced overvoltages, STL T23 is a widespread market solution amongst OEM manufacturers of LED lighting systems.
STP PV is the series of surge protective devices that provide advanced overvoltage protection to photovoltaic systems by utilizing Mersen’s optimized dynamic thermal disconnection system, which does not require additional overcurrent protection (back-up fuse) due to its high short-circuit withstand rating. These surge protective devices are suitable for all PV applications: large-scale, rooftop and self-consumption (off-grid) DC installations. The series includes specific multipole products for multiple MPPT (Maximum power point tracker) inverters.
ST T23 20 is the series of combined Type 2+3/Class II+III surge protective devices for discharging voltage surges while providing a very fine voltage protection level, in accordance with EN/IEC 61643-11.
Suitable as the final stage of protection in panels with Type 2 protection devices installed upstream such as STP T2 40 SPDs. These SPDs should be installed as close as possible to the equipment being protected. Also available with EMI filter.
STP T2 40 is the series of Type 2/Class II surge protective devices for discharging voltage surges, in accordance with EN/IEC 61643-11 and certified UL 1449 4th Ed.
Suitable for the second stage of protection in supply distribution panels in which Type 1 protection devices are installed upstream, or for the first stage of protection in commercial or other applications not exposed to direct strikes and with no external lightning protection system.
STP T12 is the series of combined Type 1+2/Class I+II surge protective devices for discharging lightning currents and protecting against voltage surges, in accordance with EN/IEC 61643-11. Suitable as the first step of protection in incoming power supply panels and areas with exposure to the atmosphere, where installations are usually provided with an external lightning protection system.
