Product
S226727 - BB23PPRFS
NH plastic base Size NH2 1250VAC 1000VDC 400A 3-Pole DIN Rail Connection Screw Indirect touch protection IP20
Providing the widest range of circuit protection products in the industry means that we offer solutions for everyone from OEMs and panel builders to MROs and electrical contractors either directly or via electrical distributors.
All products
1267 products
Product
X1062758 - CUS101IHEL
Fuse Holder IEC+UL/CSA Size 10x38 1-Pole DIN Rail mounting
Series
PV Modular fuse-holder CUS101HEL
The innovative and comprehensive Modulostar® range of Mersen fuse-holders.
CUS101HEL series are specially designed for the protection of PV systems.
Modular fuse-holders are finger-safe under IEC and UL standards to an IP20 grade of protection, including fuse changing (with the flick of a finger). Modular fuse-holders CUS101HEL are available in 1 pole, with or without visual blown fuse indicator.
Modulostar® range is made of tough and durable thermoplastic material.
CUS101HEL series are specially designed for the protection of PV systems.
Modular fuse-holders are finger-safe under IEC and UL standards to an IP20 grade of protection, including fuse changing (with the flick of a finger). Modular fuse-holders CUS101HEL are available in 1 pole, with or without visual blown fuse indicator.
Modulostar® range is made of tough and durable thermoplastic material.
They are especially recommended to be used in combination with Mersen fuse-links HP6M and HP10M.
Product
K1062724 - CUS101HEL
Fuse Holder IEC+UL/CSA Size 10x38 1000VDC IEC 1000VDC UL 1-Pole DIN Rail mounting
Product
Q214535 - 01722.450000
DIN Fuse base Size D03 400VAC 100A 1-Pole without touch prot. DIN Rail mounting Clamp Strap / Screw
Series
NZ D0 fuse-bases 400VAC
The D0 fuse-system is installed in low voltage ditribution units, where fuse-links are accessible to non trained persons and can also be replaced by them.
This system is the newest generation of screw fuse-system in the german DIN standard and is designed for 400VAC/250VDC networks.
The D0 fuse-bases are available in the sizes D01, D02 and D03.
This system is the newest generation of screw fuse-system in the german DIN standard and is designed for 400VAC/250VDC networks.
The D0 fuse-bases are available in the sizes D01, D02 and D03.
D0 fuse-bases are used in combination with D0 fuse-links for the protection of cables and power lines. D0 fuse-links limit and cut-off unacceptable overcurrents and short circuit currents up to their nominal breaking capacity. They also protect equipments and installations against dynamic effects of high short circuit currents.
Product
A219144 - 01730.172000
DIN Fuse base Size D01 400VAC 16A 3-Pole with touch protection DIN Rail mounting Clamping Yoke
Product
B211463 - 01720.170000
DIN Fuse base Size D01 400VAC 16A 1-Pole with touch protection DIN Rail mounting Clamping Yoke
Product
B216063 - 01730.152000
DIN Fuse base Size D01 400VAC 16A 3-Pole without touch protection DIN Rail mounting Clamping Yoke
Product
W215552 - 01721.450000
DIN Fuse base Size D02 400VAC 63A 1-Pole without touch protection DIN Rail mounting Clamp Strap / Screw