Product
B1212975 - PG3-1P-V-ST1A
NH Fuse switch disconnector ProGrid Size 3 3x1-pole switching Bus bar system 185 mm ST1A
Providing the widest range of circuit protection products in the industry means that we offer solutions for everyone from OEMs and panel builders to MROs and electrical contractors either directly or via electrical distributors.
All products
362 products
Product
F1212818 - PG2-1P-B-SB1A
NH Fuse switch disconnector ProGrid Size 2 3x1-pole switching Bus bar system 185 mm SB1A
Product
Y1212650 - PG2-1P-B-ST1A
NH Fuse switch disconnector ProGrid Size 2 3x1-pole switching Bus bar system 185 mm
Product
Q1212827 - PG2-1P-V-SB1A
NH Fuse switch disconnector ProGrid Size 2 3x1-pole switching Bus bar system 185 mm SB1A
Product
M1212824 - PG2-1P-V-ST1A
NH Fuse switch disconnector ProGrid Size 2 3x1-pole switching Bus bar system 185 mm ST1A
Product
D1212839 - PG2-2x1P-B
NH Fuse switch disconnector ProGrid Size 2 3x1-pole switching Bus bar system 185 mm
Product
L1212961 - PG3-1P-B-SB1A
NH Fuse switch disconnector ProGrid Size 3 3x1-pole switching Bus bar system 185 mm SB1A
Product
N1212963 - PG3-1P-B-ST1A
NH Fuse switch disconnector ProGrid Size 3 3x1-pole switching Bus bar system 185 mm ST1A
Series
MULTIFIX® 60 , D02 Vertical Switch Fuse Disconnector 63A, 400VAC, Triple Pole
MULTIFIX® 60 is a system for energy distribution comprising a variety of modular combinable components. The energy distribution is carried out via copper bus bars in a 60 mm bus bar system up to 630 A, 400 V AC, 500 V AC, 690 V AC, 45–62 Hz. Short circuit withstand tested to VDE 0660 part 500 and IEC 60439-1.
MULTIFIX® 60 is suitable for triple pole, quadruple pole and quintuple pole applications.
The components of the MULTIFIX® 60 system are mounted directly without drilling. This method offers high flexibility for extension and alteration of existing installations -> reduced installation time.
D02-vertical switch fuse disconnector 63A, 400VAC, triple pole is installed on to 60 mm bus bar directly by snap in mode and automatic interlocking. It is designed for bus bars with a width of 12 to 30 mm and a thickness of 5 to 10 mm. Width of switch is only 27 mm which allows space saving, system compatible installation. The Plug technique to EN 50110-1 allows installation without screw caps.
MULTIFIX® 60 is suitable for triple pole, quadruple pole and quintuple pole applications.
The components of the MULTIFIX® 60 system are mounted directly without drilling. This method offers high flexibility for extension and alteration of existing installations -> reduced installation time.
D02-vertical switch fuse disconnector 63A, 400VAC, triple pole is installed on to 60 mm bus bar directly by snap in mode and automatic interlocking. It is designed for bus bars with a width of 12 to 30 mm and a thickness of 5 to 10 mm. Width of switch is only 27 mm which allows space saving, system compatible installation. The Plug technique to EN 50110-1 allows installation without screw caps.
Series
Smart MULTIVERT® i-Xtensio
MERSEN Smart monitoring solution is key to answer to new challenges of the electrical power grid!
The development of smart Low voltage grids will enable better understanding of the behavior of local LV networks in the context of decentralization and volatility of renewable power sources and of EV charging stations, among others.
Instant monitoring of the network values and status allows a more efficient load & demand management and higher network availability.
Critical or heavily loaded network sections can then be specifically monitored to perform preventive maintenance and high service continuity.
The most user-friendly and most compatible smart monitoring module for NH vertical fuse switch disconnectors !
The compact module designed by Mersen is by far the simplest to install monitoring device and adapts perfectly to the Multivert i-Xtensio ranges that are available today.
The product has been engineered to be fully compatible with Energy Monitoring systems existing on the market and has a very compact design for tremendous functionalities.
This device makes the data available for the end-user that can connect directly on the Modbus modules. The modules measures relevant data directly on the fuse switch disconnector and enables the users to access instantaneously to main data of energy consumption.
The development of smart Low voltage grids will enable better understanding of the behavior of local LV networks in the context of decentralization and volatility of renewable power sources and of EV charging stations, among others.
Instant monitoring of the network values and status allows a more efficient load & demand management and higher network availability.
Critical or heavily loaded network sections can then be specifically monitored to perform preventive maintenance and high service continuity.
The most user-friendly and most compatible smart monitoring module for NH vertical fuse switch disconnectors !
The compact module designed by Mersen is by far the simplest to install monitoring device and adapts perfectly to the Multivert i-Xtensio ranges that are available today.
The product has been engineered to be fully compatible with Energy Monitoring systems existing on the market and has a very compact design for tremendous functionalities.
This device makes the data available for the end-user that can connect directly on the Modbus modules. The modules measures relevant data directly on the fuse switch disconnector and enables the users to access instantaneously to main data of energy consumption.