Product
USFMBB3
USFM - BB 600V 3-Pole B3 phases
All products
12666 products
Product
USFMBB4
USFM - BB 600V 3-Pole B4 phases
Product
USFMBB5
USFM - BB 600V 3-Pole B5 phases
Product
USFMBBC1
USFM - BB 600V 3-Pole C1 phases
Series
Protistor® size 2x602 aR, 4200VDC
Mersen DC high performance power fuses were developed to provide superior protection for railway power circuits.
These fuses are typically operated at more elevated temperatures than other fuse types.
They have lower I2t to minimize damage to components in case of short circuits, and have lower watts loss and longer life.
These fuses are typically operated at more elevated temperatures than other fuse types.
They have lower I2t to minimize damage to components in case of short circuits, and have lower watts loss and longer life.
Product
M079499 - D2602SF42C400QF
Square Body High-Speed Fuse Protistor® Size 2x602 aR 4200VDC IEC 400A With Striker L Brackets
Product
N079500 - D2602SF42C500QF
Square Body High-Speed Fuse Protistor® Size 2x602 aR 4200VDC IEC 500A With Striker L Brackets
Product
H079541 - D2602SF42C630QF
Square Body High-Speed Fuse Protistor® Size 2x602 aR 4200VDC IEC 630A With Striker L Brackets
Product
N078143 - D2602SH42C750QF
Square Body High-Speed Fuse Protistor® Size 2x602 aR 4200VDC IEC 750A With Striker L Brackets
Series
Wiring bars / Power supply for DIN Fuse Switch Disconnectors
Fork Design
Wiring bars in fork design are ideal for the wiring of modular panel-mounting devices as per DIN 43880 with flat-type, dual-function or single-screw terminals.
Additional incoming terminals are required when wiring devices with flat-type or single-screw terminals.
In contrast, devices with dual-function terminals allow bar connection to the top section of the terminal with simultaneous incoming supply in the bottom section.
The use of end caps on multi-pole wiring bars guarantees optimum shock-hazard protection and prevents arcing at bar ends.L@£Pin Design
Wiring bars in pin design are ideal for the wiring of modular panel-mounting devices to DIN 43880 with box terminal, frame terminal or two-scre clamp.
The incoming supply to the wiring-bar system is provided over additional incoming terminals.
Wiring bars in fork design are ideal for the wiring of modular panel-mounting devices as per DIN 43880 with flat-type, dual-function or single-screw terminals.
Additional incoming terminals are required when wiring devices with flat-type or single-screw terminals.
In contrast, devices with dual-function terminals allow bar connection to the top section of the terminal with simultaneous incoming supply in the bottom section.
The use of end caps on multi-pole wiring bars guarantees optimum shock-hazard protection and prevents arcing at bar ends.L@£Pin Design
Wiring bars in pin design are ideal for the wiring of modular panel-mounting devices to DIN 43880 with box terminal, frame terminal or two-scre clamp.
The incoming supply to the wiring-bar system is provided over additional incoming terminals.