Product
FESF350
Fuse FES – HRC-II 600VAC 460VDC 350A Blade FESF
All products
13179 products
Engineered Panels
Critical Power Panel (CPP)
Mersen’s Critical Power Panel series panelboard offers customers a smaller footprint and lighter weight for quicker installation and reduced cost
Engineered Panels
Fused Coordination Panelboard
The next generation of Fused Coordination Panelboards is here with coordinated protection between overloads and short circuits
Series
25kA - 25mm TPMOV (Thermally Protected MOV)
Mersen’s TPMOV technology eliminates common failure
modes that occur in the field with standard metal oxide varistors.
Internally each component is comprised of a voltage clamping device and
a disconnecting apparatus that monitors the status of the metal oxide
disc making the TPMOV surge suppression component a fail-safe device. Upon failure the TPMOV surge suppression component is
also equipped with a visual pin indicator as well as a normally open
micro-switch providing remote indication, if applicable. Mersen’s
25TPMOV series surge suppression component is rated for 25kA - 8/20μs peak surge current and is
available for maximum continuous operating voltages (MCOV) from
150V to 320VAC.
modes that occur in the field with standard metal oxide varistors.
Internally each component is comprised of a voltage clamping device and
a disconnecting apparatus that monitors the status of the metal oxide
disc making the TPMOV surge suppression component a fail-safe device. Upon failure the TPMOV surge suppression component is
also equipped with a visual pin indicator as well as a normally open
micro-switch providing remote indication, if applicable. Mersen’s
25TPMOV series surge suppression component is rated for 25kA - 8/20μs peak surge current and is
available for maximum continuous operating voltages (MCOV) from
150V to 320VAC.
Product
25TPMOVSL150
SPD - TPMOV 150V Short Leads Microswitch 25 kA 500 pk
Product
25TPMOVSL320
SPD - TPMOV 320V Short Leads Microswitch 25 kA 500 pk
Series
Protistor® size 2x72 and 2x73 aR, 550 to 1250VAC (IEC)
The 1250V Protistor® fuse-links provide maximum flexibility in equipment design and ultimate protection for today's power conversion equipment. These aR ultra-fast acting square body fuse-links are available in different body sizes, each size having multiple worldwide acceptable mounting styles.
They have been engineered to provide state-of-the-art protection for semiconductors: diodes, thyristors and IGBT devices. They are assembled with die-cut elements embedded in solidified sand, which helps control arcing characteristics for a lower I²t and high interrupting rating level. All contact surfaces are silver plated and all hardware is non-magnetic.
All fuse-links can be equipped with a low voltage trip-indicator which can operate a field mountable microswitch.
They have been engineered to provide state-of-the-art protection for semiconductors: diodes, thyristors and IGBT devices. They are assembled with die-cut elements embedded in solidified sand, which helps control arcing characteristics for a lower I²t and high interrupting rating level. All contact surfaces are silver plated and all hardware is non-magnetic.
All fuse-links can be equipped with a low voltage trip-indicator which can operate a field mountable microswitch.
Series
Protistor® size 70 aR, 1100 to 1250VAC (IEC) / 1300VAC (UL)
The 1250/1300V Protistor® fuse-links provide maximum flexibility in equipment design and ultimate protection for today's power conversion equipment. These aR ultra-fast acting square body fuse-links are available in different body sizes, each size having multiple worldwide acceptable mounting styles.
The Protistor® have been engineered to provide state-of-the-art protection for semiconductors: diodes, thyristors, GTO's and IGBT devices. Fuses are assembled with pure silver, die-cut elements embedded in solidified sand, which helps control arcing characteristics for a lower I²t and high interrupting rating level. All contact surfaces are silver plated and all hardware is non-magnetic.
All fuse-links can be equipped with a low voltage trip-indicator which can operate a field mountable microswitch.
The Protistor® have been engineered to provide state-of-the-art protection for semiconductors: diodes, thyristors, GTO's and IGBT devices. Fuses are assembled with pure silver, die-cut elements embedded in solidified sand, which helps control arcing characteristics for a lower I²t and high interrupting rating level. All contact surfaces are silver plated and all hardware is non-magnetic.
All fuse-links can be equipped with a low voltage trip-indicator which can operate a field mountable microswitch.
Series
Protistor® size 73 aR, 600 to 1250VAC (IEC) / 1300VAC (UL)
These 1250/1300V Protistor® fuse-links provide maximum flexibility in equipment design and ultimate protection for today's power conversion equipment. These aR ultra-fast acting square body fuse-links are available in different body sizes, each size having multiple worldwide acceptable mounting styles.
The Protistor® have been engineered to provide state-of-the-art protection for semiconductors: diodes, thyristors and IGBT devices. Fuses are assembled with die-cut elements embedded in solidified sand, which helps control arcing characteristics for a lower I²t and high interrupting rating level. All contact surfaces are silver plated and all hardware is non-magnetic.
All fuse-links can be equipped with a low voltage trip-indicator which can operate a field mountable microswitch.
The Protistor® have been engineered to provide state-of-the-art protection for semiconductors: diodes, thyristors and IGBT devices. Fuses are assembled with die-cut elements embedded in solidified sand, which helps control arcing characteristics for a lower I²t and high interrupting rating level. All contact surfaces are silver plated and all hardware is non-magnetic.
All fuse-links can be equipped with a low voltage trip-indicator which can operate a field mountable microswitch.
Series
Protistor® size 72 aR, 850 to 1250VAC (IEC) / 1300VAC (UL)
These 1250/1300V Protistor® fuse-links provide maximum flexibility in equipment design and ultimate protection for today's power conversion equipment. These aR ultra-fast acting square body fuse-links are available in different body sizes, each size having multiple worldwide acceptable mounting styles.
The Protistor® have been engineered to provide state-of-the-art protection for semiconductors: diodes, thyristors and IGBT devices. Fuses are assembled with die-cut elements embedded in solidified sand, which helps control arcing characteristics for a lower I²t and high interrupting rating level. All contact surfaces are silver plated and all hardware is non-magnetic.
All fuse-links can be equipped with a low voltage trip-indicator which can operate a field mountable microswitch.
The Protistor® have been engineered to provide state-of-the-art protection for semiconductors: diodes, thyristors and IGBT devices. Fuses are assembled with die-cut elements embedded in solidified sand, which helps control arcing characteristics for a lower I²t and high interrupting rating level. All contact surfaces are silver plated and all hardware is non-magnetic.
All fuse-links can be equipped with a low voltage trip-indicator which can operate a field mountable microswitch.