Product
83230500 - STMT23-6K20V-SP-S
Surge Protection Device Type 2+3, 6kA Imax (8/20), 1Ph+N, 12/-V, Slim, SP TT/TNS, 2 Poles, Monobloc, 1 Module
Providing the widest range of circuit protection products in the industry means that we offer solutions for everyone from OEMs and panel builders to MROs and electrical contractors either directly or via electrical distributors.
All products
729 products
Series
75kA and 50kA - 34mm TPMOV (Thermally Protected MOV)
Mersen’s TPMOV technology eliminates common failure modes that occur in the field with standard metal oxide varistors. Internally each unit is comprised of a voltage clamping device and a disconnecting apparatus that monitors the status of the metal oxide disk, making the TPMOV surge suppression component a fail-safe device. In the event of an overvoltage breakdown, the metal oxide disc is securely disconnected from the system power by an arc shield. Upon failure, the TPMOV surge suppression component is also equipped with a visual pin indicator as well as a normally open micro-switch, providing remote indication if applicable.
TPMOV7 series surge suppression component: 50% more surge capacity, in the same footprint
The TPMOV7 series is rated for 75kA - 8/20μs peak surge current and is available for maximum continuous operating voltages (MCOV) from 150V to 320VAC.
The TPMOV7 series is rated for 75kA - 8/20μs peak surge current and is available for maximum continuous operating voltages (MCOV) from 150V to 320VAC.
Product
150TPMOV
SPD - TPMOV 150V Standard Leads Microswitch Visual Tabs 50 kA
Series
Surge-Trap® Pluggable STPT2 Series - 40kA
STP T2 40 is the series of Type 2/Class II devices for discharging voltage surges, in accordance with EN/IEC 61643-11. Suitable for the second stage of protection in supply distribution panels in which Type 1 protection devices are installed upstream, or for the first stage of protection in commercial or other applications not exposed to direct strikes and with no external lightning protection system.
Series
Surge-Trap® K - K2 Series
Surge-Trap® K - K2 Series is a range of devices Type 2/Class II designed to protect against induced voltage surges (8/20 μs).
Série
Surge-Trap® Monobloc STMZT12 Series
STMZ T12 is the series of combined Type 1+2/Class I+II devices according to EN 61643-11 for use in the pre-counter area installed directly on 40 mm busbar system with coordination to terminal equipment (≤ 5m) Typ 1+2+3. Easy end fast fulfillment of VDE 0100-443/ -534. Depending on the product it can be used for TNC or TT-/TNS systems as well as for applications with or without external lighting protection systems.
Series
Surge-Trap® Pluggable STPT12 Series - 25kA
STP T12 25 is the series of combined Type 1+2/Class I+II devices for discharging lightning currents and protecting against voltage surges, in accordance with EN/IEC 61643-11. Suitable as the first step of protection in incoming power supply panels and areas with exposure to the atmosphere, where installations are usually provided with an external lightning protection system.
Series
Surge-Trap® Pluggable STPT12 Series - 12.5kA
STP T12 12.5 is the series of combined Type 1+2/Class I+II devices for discharging lightning currents and protecting against voltage surges, in accordance with EN/IEC 61643-11. Suitable as the first step of protection in incoming power supply panels and areas with exposure to the atmosphere, where installations are usually provided with an external lightning protection system.
Series
Surge-Trap® K - K1 Series
Surge Trap® K- K1 Series is a range of devices Type 1+2 / Class I+II which are designed to protect electrical installations from lightning strikes (10/350 μs) and induced voltage surges (8/20 μs). Ergonomic DIN Rail Pluggable format.
Series
Surge-Trap® K - K1 LF Series
Surge-Trap® K - K1 LF Series with Leakage Current Free is a range of devices Type 1+2/Class I+II which are designed to protect electrical installations from lightning strikes (10/350 μs) and induced voltage surges (8/20 μs). Ideal for protection upstream of smart-meters (no losses).