83010107 - STMT1-50K440V-1P
Protection contre les surtensions transitoires Type 1, 50kA Iimp (10/350), 1Ph, 400V, L-N, 1 Pôle, Monobloc, 2 Modules
83120167 - STPT12-5K1000V-YPV
Protection contre les surtensions transitoires Type 1+2, 5kA Iimp (10/350), Y PV, 1000Vdc, Photovoltaïque, 3 Pôles, Débrochable, 3 Modules
30352
Bloc-fusible 600VAC 600VDC 10x38mm (Midget) 30A 2 pôles Boîtier en cuivre
30322
Bloc-fusible 600VAC 600VDC 10x38mm (Midget) 30A 2 pôles Connexion à plaque de pression avec machoire renforcée
A240R2R
Fusible Back-up moyenne tension de classe R 2400VAC 2R Montage: Capsule Indicateur visuel Amp-Trap®
A240R1R
Fusible Back-up moyenne tension de classe R 2400VAC 1R Montage: Capsule Indicateur visuel Amp-Trap®
9F60ECB050
Fusible moyenne tension E-Rated 2750VAC 50A Capsule, série : ECB Indicateur visuel
9F61 Size B Clips
Fuse supports, fuse disconnect switches and accessories from 2.4kV to 38kV.
Fuse supports, non-disconnecting, are used primarily in potential transformer circuits, or where there is some other disconnecting or isolating device in series with the fuse in the circuit. Disconnecting switch devices have the additional feature of serving to isolate the equipment they protect. It should be noted that disconnecting switches are not load-breaking devices, therefore, the circuit must be open prior to the fuse disconnection. Select either a fuse support or a disconnecting switch for each fuse. Fuse supports and disconnecting switches include live parts for both ends. Both fuse supports and fuse disconnect switches can be mounted vertically or horizontally. The type EK are used for indoor installations while the type EKO are used outdoors.
Fuse supports, non-disconnecting, are used primarily in potential transformer circuits, or where there is some other disconnecting or isolating device in series with the fuse in the circuit. Disconnecting switch devices have the additional feature of serving to isolate the equipment they protect. It should be noted that disconnecting switches are not load-breaking devices, therefore, the circuit must be open prior to the fuse disconnection. Select either a fuse support or a disconnecting switch for each fuse. Fuse supports and disconnecting switches include live parts for both ends. Both fuse supports and fuse disconnect switches can be mounted vertically or horizontally. The type EK are used for indoor installations while the type EKO are used outdoors.
9F61BWW460
9F61 Size B Clips 1.6in